;This config file is optional, if you want to just use the defaults you do not require this file

; AutoLoadIOS : Auto Load this IOS at start of app(This will make you lose AHBPROT)
; default =0(disabled), set =The IOS you want to load(ex 236 if you want to load IOS 236 at start)
; To disable either comment out the line with a ';' or set =0
AutoLoadIOS=236

; AutoLoadOnInstall : If the AutoLoadIOS is not installed when it is should Wii Mod
; reload AutoLoadIOS?
; default =0(disabled), set =1 to reload the AutoLoadIOS when it is installed
; To disable either comment out the line with a ';' or set =0
AutoLoadOnInstall=0

; DisableSetAHBPROT : The new SetAHBPROT patch has a downside, it causes usb
; drives to not load. So this option allows you to disable the patch to reenable
; usb functionality.
; default =0(disabled), set =1 to disable SetAHBPROT patch and fix usb
DisableSetAHBPROT=0

; DeleteDefaultInsteadRemove : Change delete ios method when higher version is found during install
; When installing an IOS over a clean IOS with a higher version the default action now is to try to
; change the version and then install over it with the new IOS. This option switches the default
; behavior back to just deleting the ios.
; default =0, set =1 to override default
; To disable either comment out the line with a ';' or set =0
DeleteDefaultInsteadRemove=0

; outputios : Save IOS details to csv after each checking of all IOSs
; default =1, set =0 to disable saving to csv
outputios=1

; loadoldcsv : load IOS details saved from previous run( useful for AHBPROT mode )
; default =1, set =0 to disable loading from csv
loadoldcsv=1

; printiosdetails : Print IOS details in IOS menu
; default =1, set =0 to disable showing IOS details
printiosdetails=1

; filterwads : In wadmanager filter files to only wads
; default =1, set =0 to disable filter other file types
filterwads=1

; smb settings : set username password ip address and sharename here
; Here is an example config if you had a share at \\192.168.1.100\wad
; with username "user" and password "password".
SMB_USER=administrator
SMB_PWD=
SMB_SHARE=
SMB_IP=

; skipios : Sometimes loading an ios will error or leave the app(nandemu) which
; is a problem for check ios, so this option allows you to blacklist IOS numbers
; so that they aren't loaded during check ios. You can also have more than one set
; so for example
;skipios=253
;skipios=254
; these two would skip checking sorg's nandemu and bootmii. Note: the app already skips these two
; IOSs so you shouldn't enable these examples.

; skiphash : This option is similar to skipios but instead of blacklisting a number like 254,
; this option blacklists a particular hash. You can get hashes of IOSs by disabling the checking
; IOS and enabling dump hash on the check IOS menu. You can also have more than one set.
; so for example
;skiphash=58c5d8b1,ccaa035b,14d3e159,3209c037,a915552a
;skiphash=8e669eb1,f72a1f6f,36b19cc6,1743a3f,c860f5cb
; these two would skip checking sorg's nandemu and bootmii. Note: the app already skips these two
; IOSs so you shouldn't enable these examples.